Xerox 5222 manual Code, Description and Remedy, 016-706

15 Problem Solving

Code	Description and Remedy
016-706	The hard disk ran out of space, because the number of Secure Print users
	reached its maximum. Delete unnecessary Secure Print jobs from the machine.
016-707	The Sample Print feature is not available due to a malfunction of the hard disk.
	Contact the Xerox Welcome Center.
016-708	An annotation cannot be added due to insufficient hard disk space. Delete
	unnecessary documents from the disk.
016-710	The Delayed Print job could not be executed. Take one of the following actions:
	• Delete unnecessary data from the hard disk to increase free space.
	• Reset the settings of Print to Mailbox and Sample Print.
	• Reduce the number of stored Delayed Print jobs to less than 100 jobs.
016-711	Refer to 016-985.
016-712	Refer to 003-751.
016-713	The entered mailbox passcode is not correct. Enter the correct passcode.
016-714	The specified mailbox does not exist. Create a new mailbox or specify an
	existing mailbox.
016-716	The TIFF file could not be spooled as the size of the file exceeded the remaining
	space on disk. Increase the size of the PCL form area.
016-717	A [Transmission Report - Job Undelivered] or [Activity Report] was requested,
	but the information was not in memory. Take one of the following actions:
	• Divide Internet Fax document pages to reduce the size of a job, to increase
	memory and HDD’s free space.
	• Execute a new scan job or an Internet Fax job after scan and Internet Fax
	jobs stored in the memory space are finished.
	• Output a report before 200 or more jobs are logged.
016-718	Unable to process PCL print data due to insufficient memory. Take one of the
	following actions:
	• Lower the resolution.
	• Cancel the Multiple-Up or 2 Sided Print feature, and try again.
016-719	Unable to process PCL print data due to insufficient print page buffer memory.
	Increase the print page buffer.
016-720	The PCL print data contains an invalid command. Check the print data, and then
	try again.
016-721	A print error occurred. The Auto Tray Switching setting conflicts with the Paper
	Type Priority settings. When the Auto Tray Switching feature is enabled, select
	an option other than [Auto Paper Off] for trays on the [Paper Type Priority]
	screen.
016-722	The specified staple position is not supported. Change the staple position, and
	try again.
016-723	The specified hole-punch position is not supported. Change the hole-punch
	position, and try again.
016-724	The specified staple and hole-punch positions are not a valid combination.
016-725	A scanned document saved in a mailbox could not be converted to fax data
	using the job flow sheet. Send the document not by using the Job Flow Sheets
	service, but by using Fax service.

390