
8 Printer Environment Settings
NOTE: If multiple parameters are specified in the first lpr command, data may not be printed correctly.
NOTE: The system default is used if no tray number is specified, or a specified tray or specified size of paper is not loaded.
NOTE: This option is for specifying paper size only. Paper is selected but the document size is not resized to fit the actual paper size.
NOTE: If the print data specifies a paper tray, the setting takes priority over any
NOTE: If an invalid combination is specified, the machine may not operate correctly.
NOTE: For some print languages, the specification may be invalid.
Selecting a paper output tray
The following parameter can be specified.
Parameter | Description |
|
|
|
|
STACKER%n/stacker%n | Delivers prints to a finisher tray. (%n: bin number 1) |
|
|
Selecting a paper type
The following parameters can be specified.
Parameter | Description |
|
|
|
|
PTS/pts | Selects plain paper. |
|
|
PT1/pt1 | Selects thick paper 1. |
|
|
POH/poh | Selects transparency. |
|
|
PTP/ptp | Selects tracing paper. |
|
|
PRC/prc | Selects recycled paper. |
|
|
Specifying double-sided printing
The following parameters can be specified.
Parameter | Description |
|
|
|
|
DUP/dup | |
|
|
TUMBLE/tumble | |
| A B |
| C D |
|
|
SIMP/simp | |
|
|
NOTE: If multiple parameters are specified in an lpr command, data may not print correctly.
NOTE: The system default is used if no parameter is specified.
246