System Settings
•Device Certificate
Specifies the certificate for the PDF/XPS signature. For information on certificates, refer to Security - Encryption/Digital Signature on page 297.
•PDF Signature
Specifies whether to add a PDF signature, whether to add a visible or invisible signature, or whether to prompt the user to add a signature.
•XPS Signature
Specifies whether to add a XPS signature, or whether to prompt the user to add a signature.
IPSec Settings
Allows you to configure the IPSec settings.
•IKE Authentication Method Specifies the authentication method.
•Preshared Key
Specifies the preshared key. A preshared key is a password used for establishing trust between devices. This setting is valid when [IKE Authentication Method] is set to [Authenticate by Preshared Keys].
•Device Certificate
Specifies the device certificate. This setting is valid when [IKE Authentication Method] is set to [Authenticate by Digital Signature].
•IPSec Communication
Specifies whether to enable IPSec communications.
•IKE SA Life Time
Specifies the IKE SA lifetime in the range of 60 to 28800 minutes in 1 minute increments. The value must be greater than the value set in [IPSec SA Life Time].
•IPSec SA Life Time
Specifies the IPSec SA lifetime in the range of 300 to 28800 seconds in 1 second increments. The value must be smaller than the value set in [IKE SA Life Time].
•DH Group
Specifies the DH group. [G2] ensures higher security than [G1].
•PFS Settings
Specifies whether to enable the PFS (Perfect Forward Security).
•Destination IPv4 Address
Specifies the destination address or the range of addresses in IPv4 format.
•Destination IPv6 Address
Specifies the destination address or the range of addresses in IPv6 format.
•Communicate with
Specifies whether to enable communication with
IEEE 802.1x Settings
Allows you to configure the IEEE 802.1x authentication settings.
99