3 Maintenance
1.Make sure that the machine is not operating, and open the front cover of the finisher.
2.Hold the staple cartridge by the lever R1 and pull it to the right.
Lever R1 |
3.Hold the staple cartridge by the orange lever and remove it from the finisher.
NOTE: The staple cartridge is firmly inserted. A slight force is required to pull the cartridge out of the finisher.
4.Pinch both sides of the empty staple case with your fingers (1), and remove the staple case from the cartridge (2).
Orange Lever |
2 |
1 |
1
5.Insert the front side of the new staple case into the staple cartridge (1), and then push the rear side into the cartridge (2).
6.Hold the staple cartridge by the orange lever, and insert it into the finisher until it clicks.
7.Close the front cover of the finisher.
2
1
NOTE: If the front cover is not completely closed, a message will appear and the machine will not operate.
36
