Xerox 5222 manual Storing and Handling Paper, Supported Paper Sizes and Types, Standard Sizes

Storing and Handling Paper

Storing and Handling Paper

Always use high quality, xerographic grade paper in the machine. Damaged, curled, or damp paper can cause jams and image quality problems. Follow these simple rules to store paper.

•Store paper in dry conditions, away from extreme heat or cold, such as radiators or open windows.

•Store paper flat on a shelf or pallet above floor level.

•Leave the paper wrapped and boxed until ready to be used.

•Re-wrap partly used packages of paper.

NOTE: Do not store paper in the paper trays.

Supported Paper Sizes and Types

This section lists the sizes and types of paper that can be used with the machine.

Supported Paper Sizes

The following table lists the paper sizes supported by each paper tray, output tray, and the duplex module.

NOTE: For the capacity of each tray, refer to Appendix on page 421.

Standard Sizes

NOTE: The standard sizes of paper that can be detected vary depending on the paper size table specified by the System Administrator. For information on setting the paper size table, refer to Paper Size Settings in the Setups chapter on page 78.

Paper Trays - Standard Sizes

				Tray 1, 2	Tray 3, 4		Tray 6
				/	(High	Tray 5
	Dimensions		LEF/				(High	Envelope
Paper Size				Tray 3, 4	Capacity	(Bypass
	(mm)		SEF				Capacity	Tray
				(Two Tray	Tandem	Tray)
							Feeder)
				Module)	Tray)
A6	105.0	148.0	LEF			O
A5	148.0	210.0	SEF			O
			LEF			O
A4	210.0	297.0	SEF	O		O
			LEF	O	O	O	O
A3	297.0	420.0	SEF	O		O
B6	128.5	182.0	SEF			O
B5	182.0	257.0	SEF	O		O
			LEF			O
B4	257.0	364.0	SEF	O		O
5.5 × 8.5”	139.7	215.9	SEF	O		O
			LEF			O

23