15Problem Solving

6.Pull down the front lever on the staple cartridge until it clicks into place.

7.Return the staple cartridge to its original position.

8. Close the front cover of the Integrated Office Finisher.

If the staples cannot be removed after carrying out the above procedures, contact your Xerox Welcome Center.

Staple Jams in the Office Finisher LX (Optional)

The following describes how to clear staple jams when the Office Finisher LX (optional) is installed.

1.Make sure that the machine has stopped, and then open the front cover on the Office Finisher LX.

2. Hold the staple cartridge by Lever R1, and slide the cartridge rightward.

Lever R1

3.Hold the staple cartridge by the orange lever, and lift up to remove the cartridge. Check the inside of the Office Finisher LX for any remaining staples.

Orange Lever

356

Page 356
Image 356
Xerox 5222 manual Staple Jams in the Office Finisher LX Optional, Lever R1