Page 4 For technical questions, please call 1-800-444-3353. Items 41188
69513
Specifications
Model 41188 69513
Load Rating 1 Ton (2,000 lb.)
Min. Height 99-1/2 IN. 100 IN.
Max. Height 148 IN. 147 IN.
Distance Between Posts 94 IN. 93 IN.
I-Beam 2-7/8 IN. W 3 IN. W
Assembly
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY AND DEATH:
Wear ANSI-approved safety goggles, hard hat,
heavy-duty work gloves, and steel-toed work boots
during assembly and operation.
The correct bolts must be used during assembly. If any doubts arise regarding proper
assembly, contact Harbor Freight at the number at the bottom of this page before use.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 14.
Assembly Setup1. Use a large, clean and uncluttered
area for assembly.
2. The Gantry Crane is large and heavy;
lay out parts on their sides and tighten and
erect entire assembly once complete.
3. More than one person will be
needed for assembly.
4. Use saw horses (not included) to
support larger items such as Posts
and I-Beam during assembly.
5. The Post Insert (1) and Post Sleeve (2)
are pre-assembled.
SAFETY OPERATION MAINTENANCEASSEMBLY