Page 2 For technical questions, please call 1-800-444-3353. Items 41188
69513

Table of Contents

Safety .................................................2
Specifications .....................................4
Assembly ............................................4
Operation ............................................8
Maintenance ......................................12
Parts List and Diagram ......................14
Warranty ............................................16
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
TO PREVENT SERIOUS INJURY AND DEATH:

Basic Safety Information

1. Do not lift more than rated load.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
2. Do not operate hoist when load
is not centered under hoist.
3. Do not operate hoist with twisted,
kinked, or damaged chain or rope.
4. Do not operate a damaged or
malfunctioning gantry crane.
Inspect gantry crane carefully and
test operation before every use.
5. Do not lift people or lift loads over people.
Falling loads can injure or kill people.
6. Do not operate with other
than manual power.
7. Do not remove or cover
warning labels and/or tags.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
8. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by
the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
SAFETY OPERATION MAINTENANCEASSEMBLY