Page 10 For technical questions, please call 1-800-444-3353. Items 41188
69513
WARNING! Follow all safety warnings and instructions for the trolley and hoist you
will use with this gantry crane. Additional selected operation points follow:
Applying the Load1. Attach the load to the load hook securely
by properly rated, suitable means,
such as chains, shackles, hooks,
lifting slings, etc. Load must be attached
to prevent accidental disconnection.
Figure H: — Correct and incorrect
load hook attachment
2. Properly seat the sling or other device
in the base (bowl or saddle) of the hook
(see the left side diagram on Figure H).
Do not allow the hook hitch to
support any part of the load.
3. Do not apply the load to the point of the hook
(shown in Figure H on the right side diagram).
4. Do not operate the hoist unless the
hoist unit is centered over the load.
5. Do not pick up a load in excess of the rated
load appearing on the hoist or load block,
except during properly authorized tests.
Do not use a hoist overload limiting device
to measure the maximum load to be lifted.
6. Give specific attention to load balancing and
hitching or slinging to prevent load slipping.
SAFETY OPERATION MAINTENANCEASSEMBLY