Page 5For technical questions, please call 1-800-444-3353.Items 41188
69513
Assembly Instructions
1. Attach each Post Insert (1) to the I-Beam (4)
using four Beam Bolts (29), Washers (19),
Spring Washers (15), and Nuts (16).
The Post Assemblies must be
turned so that the Pulley Boxes (6)
face outward. See Figure A.
I-Beam (4)
Post Insert (1)
Bolt (29),
Washer (19)
Figure A
2. Attach two Casters (9) to each
Base Assembly (3) using
Caster Bolts (11), Spring Washers (12),
and Nuts (13). See Figure B.
Caster
(9)
Base
Assembly (3)
kingpin bearing
raceway
Figure B
NOTE: Before attaching the Bases to the
Posts, apply grease to the kingpin bearing
raceway in each Caster. It is easier to grease
the Casters at this point as opposed to when
the Gantry Crane is complete. See Figure B.
SAFETYOPERATIONMAINTENANCE ASSEMBLY