Standard Equipment and Specifications

1. Standard Equipment and Specifications

Max. Front Wheel Assist Tractor HP (Drawbar HP):
12’	300 HP
14’	250 HP
Moldboard Width	12’ or 14’
Moldboard Dimension	1/2” x 20”
Cutting Edge	1/2” x 6”
Support Stand	Std.
Hitch	CAT III-IV and QH
King Pin Diameter	5” Steel Bar
Adjustment Types	Hydraulic
Offset (Maximum Left or Right)	50”
Pivot:
Forward Angle	Up to 45°
Reverse Angle	Up to 45°
Tilt (Up and Down)	Up to 15°
No. of No-Wrench Adjustments	N/A
Weight (Approx.):
12’	3463 lbs.
14’	3603 lbs.

300 Series 09/10

Operation Section 4-3