MAINTENANCE
300 Series 09/10 Maintenance Section 5-2
© 2010 Alamo Group Inc.
MAINTENANCE

Lubrication

The Bush Hog 300 Series is a rugged, dependable
Blade that should perform satisfactorily with the
following preventive maintenance:
Lubricate the Moldboard Pivot Pin (Figure Asm-
0001), the Moldboard Tilt Pin (Figure Asm-0002),
and Mainframe Swing Pin on the A-Frame after
every 10 hours of operation. Decals are placed in
locations about the implement indicating locations
of Grease Fittings.
Replace excessively worn Grader Blade when
ditching. A badly worn cutting edge increases the
strain on the Blade and the Tractor and reduces
efficiency.
If the Gauge Wheel is used, a Grease Fitting is
provided at the Caster Pivot location and on Wheel
Hub.