Bush Hog 300 manual Assembly of Moldboard to Mainframe

ASSEMBLY

ASSEMBLY

Assembly of Moldboard to Mainframe

The Bush Hog 300 Series Blade is shipped in two bundles. The Mainframe, A-Frame and Moldboard Carrier are in one bundle; the Moldboard is in the second bundle. The assembly of the Moldboard to the Moldboard Carrier is made by inserting the Moldboard Pivot Pin and securing with Bolts.

Until Hydraulic Cylinders are connected and under pressure, block Moldboard to Moldboard Carrier to prevent possible tilting and falling from stand.

300 Series 09/10 Assembly Section 3-2

© 2010 Alamo Group Inc.