System Settings
Receiving Buffer - Port 9100
Specifies the input buffer memory capacity for Port 9100 interface within the range of
Other Settings
This feature allows you to specify a printable area and replacement method when paper runs short.
1.Select [Other Settings] in the [Features] menu.
2.Change the required settings. Use the scroll buttons to switch between screens.
3.Select [Close].
Print Area
Specifies the printable area. Select [Standard] to crop a margin 4.1 mm (0.16 inches) wide along all four edges of the paper. Select [Extended] to crop a margin of 2 mm (0.08 inches) along the edges.
Substitute Tray
Specifies the substitute tray when the machine cannot detect the paper tray corresponding to the document size with the auto paper selection.
•Display Message
Specifies a message prompt requesting paper supply be displayed without switching paper trays.
•Use Larger Size
Specifies switching to the tray loaded with the next larger size of paper and prints the document in its original size.
•Use Closest Size
Specifies switching to the tray loaded with the paper in the size closest to the selected paper. Image size may be automatically reduced as required.
NOTE: A job sent from a computer takes priority over a job instigated on the machine.
•Select Tray 5 (Bypass)
Specifies switching to the bypass tray.
Paper Type Mismatch
Specifies whether to print, display the confirmation screen, or display the paper supply screen when a paper type mismatch occurs.
Unregistered Forms
Specifies whether to abort a job which is specified to use form overlay when a form is not found (not registered) in the machine.
103
