5 Machine Status
Tools
On the [Tools] screen, the System Administrator can change various default presets on the machine, register mailboxes and job flow sheets, and configure authentication and security features.
To access all features on this screen, you must enter the machine in the System Administration mode. Use the following steps to enter the [Tools] screen in the System Administration mode.
1.Press the <Log In/Out> button on the control panel.
<Log In/Out> |
button |
2.Enter the correct user ID using the numeric keypad on the control panel or the screen keyboard.
NOTE: The default System
Administrator ID is “11111”. If the Authentication feature is enabled, you may also be required to enter a passcode. The default passcode is
3.Press the <Machine Status> button.
4.Select the [Tools] tab.
5.Select the required option.
System Settings
This menu allows you to change various default presets on the machine.
For more information on the features available, refer to System Settings on page 65.
Setup
This menu allows you to program various items, such as mailboxes, job flow sheets, and the Address Book.
NOTE: This feature is available on the [Tools] screen even when you enter the screen in the general user’s mode (when you skip Steps 1 and 2).
For more information on the features available, refer to Setup on page 122.
60