Xerox 5222 manual Workstation Setup, Solaris – page SunOS – page HP-UX– page, Printer Name

Models: 5222

1 444
Download 444 pages 41.01 Kb
Page 235
Image 235
Workstation Setup

UNIX TCP/IP

10.Use the keypad on the screen to enter an IP address for the machine in the format “xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx”. Select [Save].

11.Select [Manually Configured IPv6 Prefix], and then [Change Settings].

12.Enter an IP address prefix, and then select [Save].

13.Select [Manually Configured IPv6 Gateway], and then [Change Settings].

14.Using the same method as in step 10, enter a gateway address.

15.Select [IPv6 – IP Filter], and then select [Enabled] or [Disabled].

NOTE: If you do not wish to use the IP filter feature, select [Disabled].

NOTE: Use CentreWare Internet Services to register the IP addresses which are not allowed to access the machine. Refer to CentreWare Internet Services on page 147.

16.When you have finished establishing TCP/IP, select [Close] on the [Protocol Settings] screen.

Workstation Setup

This section explains how to set up Solaris, SunOS, and HP-UX workstations. Refer to the relevant instructions below:

Solaris – page 236

SunOS – page 237

HP-UX – page 238

Print language/mode/logical printer

A printer name for the logical printer should correspond to the print language/mode to be used for printing, or to the Logical Printer Number which was registered through CentreWare Internet Services.

Printer Name

Print Language/Mode/Logical Printer

 

 

 

 

PS*

PostScript

 

 

PSASC/PSA*

PostScript

 

 

PSBIN/PSB*

PostScript

 

 

PCL

PCL

 

 

LP

Print language specified on the touch screen of the machine.

 

 

DUMP/DMP

Dump mode

 

 

AUTO/ATO

Auto detection mode

 

 

TIFF/TIF

TIFF direct print

 

 

TIFF%n

TIFF (%n: Logical Printer Numbers 1 to 20 which were

 

registered through CentreWare Internet Services.)

 

 

PS%n*

PostScript (%n: Logical Printer Numbers 1 to 10 which were

 

registered through CentreWare Internet Services.)

 

 

*: Requires PostScript Kit

You can also add output parameters to the above printer name. The parameters are the same as those for -C option. Insert “_” between the printer name and output parameter, for example “PS_A4”.

235

Page 235
Image 235
Xerox 5222 Workstation Setup, Solaris – page SunOS – page HP-UX– page, Print language/mode/logical printer, Printer Name