Toshiba GA-1190 Setting up the copier settings, Original Mode, Exposure, Sorter Mode Priority

10TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing Function)

5 Click [OK] to apply the changes.

When using the Internet Explorer, the settings that are displayed in each field may not be changed even if you change the settings and click [Save]. However, the settings have been changed in the equipment. In that case, click the Copier submenu then the page displays the current settings in each field.

Setting up the copier settings

In Copier Settings, you can set the default copier settings that apply for copy operation from the LCD of this equipment.

Depending on the settings in this equipment, some copier setting items may not be displayed.

1

2

3

4

1)APS/AMS

Select whether to give priority to APS or AMS, or to disable the priority.

-APS (Automatic Paper Selection) — Automatically detects the size of the originals and selects the drawer in which paper of the same size as the originals is used.

-AMS (Automatic Magnification Selection) — Automatically sets the reproduction ratio to match the scanned original data to the paper size in the selected drawer.

-No — Disable priority.

2)Original Mode

Select the default original mode for black/white originals.

3)Exposure

Select the type of image density for black and white copy.

-Auto — Select this to set the Auto mode as the default exposure for black and white copy. The Auto mode automatically detects the density of the original to make copies at the optimum exposure.

-Manual — Select this to set the density level manually within 7 stages.

4)Sorter Mode Priority

Select the default sort mode for copying.

98 Setting up Copier Settings