Ethernet Configuration

You can specify the link speed and communication mode of Ethernet.

1 Press the [USER FUNCTIONS] button when the ready screen is displayed.

The “user functions mode” main screen appears.

2 Press or to select INI- TIAL SETUP, and then press the [ENTER] button.

USER FUNCTIONS

00001216

01.DEFAULT SETTINGS

 

02.LISTS

 

03.INITIAL SETUP

 

3 Press or to select NET- WORK, and then press the [ENTER] button.

INITIAL SETUP 03.DRAWER SET POP-UP 04.TERMINAL ID 05.NETWORK

4 Press or to select ETH- ERNET, and then press the [ENTER] button.

NETWORK 01.COMPLETE 02.ETHERNET 03.TCP/IP

5 Press or to select LINK SPEED/DUPLEX MODE, and then press the [ENTER] but- ton.

ETHERNET

01.LINK SPEED/DUPLEX MODE

6 Press or to select the desired link speed and com- munication mode.

LINK SPEED/DUPLEX MODE 1.AUTO 2.10BASE/HALF 3.10BASE/FULL

LINK SPEED/DUPLEX MODE 3.10BASE/FULL 4.100BASE/HALF 5.100BASE/FULL

Ethernet Configuration 33

Page 35
Image 35
Toshiba GA-1190 setup guide Ethernet Configuration