Loading Staples in the Office Finisher LX (Optional)
3.After removing the staple cartridge, check the inside of the finisher for any remaining staples.
4.Pinch both sides of the empty staple case with your fingers (1), and remove the staple case from the cartridge (2).
5.Insert the front side of the new staple case into the staple cartridge (1), and then push the rear side into the cartridge (2).
2 |
1 |
1 |
2 |
1 |
6.Return the staple cartridge to its original position
7.Close the front cover of the finisher.
NOTE: If the front cover is not completely closed, a message will appear and the machine will not operate.
Loading Staples in the Office Finisher LX (Optional)
The Office Finisher LX contains an automatic stapler. When the finisher runs out of staples, a message appears on the touch screen. When this message is displayed, load a new staple case into the staple cartridge.
35
