15 Problem Solving
Integrated Office Finisher
Top Cover
Paper Jams in Cover A – page 345 Paper Jams in Cover B – page 346 Paper Jams in Cover C – page 347 Paper Jams in Cover E – page 347
Paper Jams in Trays 1 and 2, Trays 3 and 4 (Optional), and the Envelope Tray (Optional) – page 348
Paper Jams in the High Capacity Tandem Tray (Optional) – page 348 Paper Jams in Tray 5 (Bypass) – page 349
Paper Jams in the High Capacity Feeder (Optional) – page 349 Paper Jams in the Integrated Office Finisher (Optional) – page 351 Paper Jams in the Office Finisher LX (Optional) – page 351
Media jams happen for a variety of reasons. Check the guidelines below to reduce potential jams in the machine.
•Use only recommended media. Refer to Supported Paper Sizes in the Paper and Other Media chapter on page 23 and Appendix on page 421 for a list of recommended media types.
•Protect unused media by storing it in its wrapper, on a flat surface.
•The orientation of the media in the paper tray must match the orientation of the documents.
•Check the maximum fill line in the tray to make sure the paper tray is not overloaded.
•Do not use media that is torn, wrinkled, or folded.
