Properties
Feature | Setting items | |
|
|
|
|
|
|
Connectivity | Protocols | SNMP Configuration (continued) |
| (continued) | • Delete – Selecting a trap on the [SNMP |
|
| Configuration > Advanced] page and clicking this |
|
| button deletes the trap. You can select and delete |
|
| multiple traps at once. |
|
| SSDP |
|
| Allows you to configure the SSDP protocol settings as |
|
| follows: |
|
| Protocol – Displays whether the protocol is enabled or |
|
| disabled. |
|
| Valid Advertising Period – Specify the time during |
|
| which the advertising period remains valid. |
|
| Maximum TTL – Specify the maximum TTL (time to |
|
| live). |
|
| Microsoft Networking |
|
| Filing Destination: |
|
| • Protocol – Displays whether the protocol is enabled |
|
| or disabled. |
|
| • Physical Connection – Displays “Ethernet”. This is a |
|
| |
|
| • Transport – Select a transport protocol from |
|
| [TCP/IP], [NetBEUI], and [TCP/IP & NetBEUI]. |
|
| • Maximum Connections – Enter the maximum |
|
| number of simultaneous connections allowed. |
|
| • Connection Timeout – “Displays “600 seconds”. This |
|
| is a |
|
| • Workgroup – Enter the name of the workgroup for |
|
| the machine. |
|
| • SMB Host Name – Enter the SMB host name with |
|
| up to 15 characters. If a name of more than 16 |
|
| characters is entered, the first 15 characters are |
|
| registered as a name. |
|
| • TBCP Filter – Select the check box to enable TBCP |
|
| Filter when processing PostScript data. This is |
|
| available only when the optional PostScript kit is |
|
| installed. When the transmission data includes |
|
| binary or EPS data, disable this feature. |
|
| • Unicode Support – Specify whether or not to support |
|
| Unicode support in the host name and workgroup |
|
| name during SMB transmission. |
|
| • Auto Master Mode – Allows you to enable or disable |
|
| Auto Master Mode. |
|
| • Password Encryption – Allows you to enable or |
|
| disable password encryption during SMB |
|
| transmission. |
|
| WINS Server |
|
| Server Information: |
|
| • Protocol – Displays whether the protocol is enabled |
|
| or disabled. |
|
| • Obtain WINS Server Address Automatically – Select |
|
| whether to obtain the WINS server address via |
|
| DHCP. The check box can be selected only when a |
|
| TCP/IP address is obtained via [DHCP] or |
|
| [DHCP/Autonet]. |
|
|
|
189
