
6 Setups
This chapter describes how to change the various defaults preset on the machine, how to register the various items such as mailboxes and destinations, and how to configure or change the System Administrator settings.
Setting Procedure
This section describes the basic setting procedure available in the System
Administration mode. Follow the steps below.
1.Enter the System Administration Mode – page 63
2.Configure a Feature – page 64
3.Exit the System Administration Mode – page 64
1.Enter the System Administration Mode
1.Press the <Log In/Out> button on the control panel.
<Log In/Out> |
button |
2.Enter the correct user ID using the numeric keypad on the control panel or the screen keyboard. For information on how to use the keyboard, refer to New Recipients in the Fax chapter of the User Guide.
NOTE: The default System Administrator ID is “11111”. If the Authentication feature is enabled, you may also be required to enter a passcode. The default passcode is
63