Xerox 5222 manual Machine Software Upgrade, PDF Direct Printing, Parameter, Item No, Value

16 Appendix

PDF Direct Printing

Parameter	Item No.	Value
Print Sets	401	1-999 (Default: 1): Specify the number of print sets.
2 Sided Print	402	0: Off (Default)
		1: LEF Binding
		2: SEF Binding
		Specifies which edge of paper is to be bound for double-sided
		printing.
Print Mode	403	0: Standard (Default)
		1: Fast
		2: High Quality
		Selects the print mode.
Sort	404	0: Off (Default)
		1: On
		Sets whether to enable sorting.
Layout	405	0: Auto Reduce/Enlarge (Default)
		1: Booklet
		2: Two-up
		3: Four-up
		4: 100% (actual size)
		Specifies layout options. “0” (Auto Reduce/Enlarge) prints with
		magnification to fit the paper size selection. “1” (Booklet) performs
		duplex printing. “2” (Two-up) and “3” (Four-up) print two and four
		pages on a single sheet of paper, respectively.
Paper Size	406	0: Auto
		1: A4 or Letter (Default)
		Sets the paper size.
Password	-	Enter a password up to 32 characters.

Machine Software Upgrade

To upgrade the software, you must first obtain the upgrade software and then install it.

Prepare for the Upgrade

It is important to obtain the correct upgrade file for your machine. Determine the software version you are currently running, as follows:

1.Open your web browser and enter http:// and the TCP/IP address of the machine in the [Address] or [Location] field. Click [Enter].

2.Click the [Properties] tab.

3.Click the [General Setup] folder.

4.Click [Configuration].

5.Scroll down to [Software] to see your system software version. Write down the version number. Note whether the Controller ROM is listed as Controller ROM or Controller + PS ROM. This will determine which file to download from Xerox.com.

430