6 Setups
Reduce/Enlarge Presets
This feature allows you to configure or change the reduction/enlargement ratio buttons that appear when [Proportional %] is selected for the [Reduce/Enlarge] feature on the [Layout Adjustment] screen.
1.Select [Reduce/Enlarge Presets] in the [Features] menu.
2.Change the required settings. Use the scroll buttons to switch between screens.
3.Select [Close].
R/E Preset 1 to 7
•Preset %
Specifies the reduce/enlarge ratios assigned to each of the seven buttons. Select from 25 options in the range of
•Variable %
Specifies the reduce/enlarge ratios using the scroll buttons in the range of 25% to 400% in 1% increments.
Other Settings
This feature allows you to configure or change other machine settings specific to the scan features.
1.Select [Other Settings] in the [Features] menu.
2.Change the required settings. Use the scroll buttons to switch between screens.
3.Select [Close].
Memory Full Procedure
Specifies the default process to execute if the hard disk becomes full while reading documents. A message asking how to process the data read up to that point is displayed. You can predefine a processing method to be performed after the message has been displayed for a specified period. If you select [Cancel Job], the data will be discarded. If you select [Run Job], the data read up to that point will be processed.
Maximum Stored Pages
Specifies the maximum number of pages to be stored in memory through scanning. Select a number in the range from 1 to 999.
TIFF Format
Specifies the type of the TIFF format to be used when TIFF is selected for saving scanned data.
Image Transfer Screen
Specifies whether to display a confirmation message when scanning is finished. Select from [Disabled], [Display Message Only], and [Display Message and Screen].
108