Xerox 5222 manual Code Description and Remedy

	Fault Codes
Code	Description and Remedy
027-797	The output destination is not correct. Specify the correct destination, and resend
	the e-mail.
033-310	If the machine is equipped with two or more lines, the Fax Billing feature cannot
	be set to ON. Contact the Xerox Welcome Center to disable the Fax Billing
	feature, or to change the machine to the single-line configuration.
033-363	A fax error occurred. Switch off the machine, and then switch it on again.
	Contact the Xerox Welcome Center if the problem persists.
033-710	The document for polling has been deleted. Store the document again.
033-712	The memory is full. Delete unnecessary data.
033-713	A fax error occurred. Switch off the machine, and then switch it on again.
	Contact the Xerox Welcome Center if the problem persists.
033-716	The mailbox specified from the remote machine does not exist. Register the
	mailbox on the machine.
033-717	The mailbox passcode specified on the remote machine is incorrect. Notify the
	correct passcode.
033-718	There are no fax documents or no documents for polling in the mailbox specified
	on the remote machine. If required, store documents in the mailbox.
033-719	The fax job was cancelled when the machine was switched off and on. Send the
	document again.
033-721	A fax error occurred. Switch off the machine, and then switch it on again.
	Contact the Xerox Welcome Center if the problem persists.
033-722	The scan job was cancelled. The document is jammed inside the machine, or
	the number of scanned pages has reached the limit value. If the problem is a
	document jam, clear the jam first. Reload only the document pages that have
	not been scanned, and press the <Start> button to continue the job.
033-724	Unable to receive the image data, because the data size that can be received
	per a fax transmission exceeds its upper limit. Request the sender to divide the
	document into smaller segments to send, or lower the resolution. If the problem
	persists, check if memory is installed correctly. If the problem persists, contact
	the Xerox Welcome Center.
033-725	The hard disk is full. Delete unnecessary data on the hard disk to increase the
	available hard disk space.
033-726	The received document was printed single sided. The 2-sided printing feature is
	not available for a mixed size document.
033-727	The orientation of the received pages could not be changed, because the data
	size was too large. They were printed without rotation.
033-728	The Auto Print formatting of the received fax document was interrupted by a
	manual print operation. No user action is required. The machine will
	automatically resume the Auto Print job after the manual printing is done.
033-731	The Auto Print processing for the received fax document was interrupted by a
	manual print operation. No user action is required.
033-733	A fax error occurred. Switch off the machine, and then switch it on again.
	Contact the Xerox Welcome Center if the problem persists.
033-734	Fax printing was suspended, because a job report was generated while the fax
	print job was being prepared. No user action is required.

411