System Settings
Allocate Memory
This feature allows you to specify memory capacities required for printing and for the receive buffer for each interface.
1.Select [Allocate Memory] in the [Features] menu.
2.Change the required settings. Use the scroll buttons to switch between screens.
3.Select [Close].
PostScript Memory
Specifies the PostScript memory capacity within the range of
Receiving Buffer - USB
Specifies the input buffer memory capacity for the USB interface within the range of 64- 1024 KB in 32 KB increments using the scroll buttons or the numeric keypad. The currently available memory will be displayed at the top of the screen with the following message: “Memory Available: XXX MB.”
Receiving Buffer - LPD
Specifies the input buffer memory capacity for the LPD interface. The currently available memory will be displayed at the top of the screen with the following message: “Memory Available: XXX MB.”
NOTE: When printing with the receiving buffer spooling set to [Memory] or [Hard Disk], each page within a job is printed in the sequence assigned by the operating system. However, sometimes pages between different jobs may not be printed in the intended sequence if, for example, printing multiple copies of a single
NOTE: If [Job Submission Order] is selected under [LPD Print Queue] in [Other Settings], this setting is fixed to [Spool to Hard Disk].
•No Spooling
Specifies no spooling. Allows you to change the input buffer memory capacity within the range of
•Spool to Memory
Specifies spooling to memory. Allows you to change the input buffer memory capacity within the range of
•Spool to Hard Disk
Specifies spooling to the hard disk.
101
