|
| Fault Codes |
|
|
|
| Code | Description and Remedy |
|
|
|
|
|
|
| The folding setting was cancelled. | |
|
| Check the folding setting, and try again. |
|
|
|
| The output destination was changed to the center tray. Check if the specified | |
|
| size paper is loaded in a paper tray. |
|
|
|
| The document exceeded the maximum number of pages that can be stapled. | |
|
| Reduce the number of pages, or cancel the stapling setting, then try printing |
|
| again. |
|
|
|
| A fax error occurred. Switch off the machine, and then switch it on again. | |
| Contact the Xerox Welcome Center if the problem persists. | |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
| The specified country code is not supported. Contact the Xerox Welcome | |
|
| Center. |
|
|
|
| A fax error occurred. Switch off the machine, and then switch it on again. | |
| Contact the Xerox Welcome Center if the problem persists. | |
|
| |
|
| |
|
|
|
| The staple/punch settings were cancelled. Specify appropriate staple/punch | |
|
| positions. |
|
|
|
| The received fax data was printed using Tray 5 (Bypass), as the selected tray | |
|
| was not available for fax printing. |
|
|
|
| A fax error occurred. Switch off the machine, and then switch it on again. | |
| Contact the Xerox Welcome Center if the problem persists. | |
|
|
|
Screen Messages
Along with fault codes, the following messages are displayed on the touch screen on some occasions.
Message | Description and Remedy |
|
|
|
|
A fault has occurred. | A fault has occurred. Switch off the machine |
Switch off the machine. Ensure that the | and wait until the touch screen is completely |
screen disappears before switching it on. | off, and then restart the machine. If the |
If the problem persists, call for service. | problem persists, write down the fault code |
| |
| the machine and contact the Xerox Welcome |
| Center. |
|
|
419
