Replacing the Drum Cartridge

Removing the Old Drum Cartridge

1. Make sure that the machine is not operating, and open the front cover.

2. Open the bypass tray and then

Cover A while lifting up the release lever.

3. Lift up the colored lever, and slide the drum cartridge out until you can grasp the handle on top of the cartridge.

4.Hold the handle and remove the

cartridge from the machine.

NOTE: When replacing the drum cartridge, make sure that the new cartridge is the correct one specified for the machine.

Inserting the New Drum Cartridge

1.Remove the new drum cartridge from the box.

2.Carefully remove the protective

sheet from the cartridge by pulling up the sealing tape.

31

Page 31
Image 31
Xerox 5222 manual Removing the Old Drum Cartridge, Inserting the New Drum Cartridge