![](/images/new-backgrounds/1283614/28361429x1.webp)
3.
Figure 8. Installing 4-in-1 inlet adapter.
Collection Bags |
|
Components and Hardware Needed: | Qty |
Upper Bag Supports | 2 |
Upper Bag Support Extenders | 2 |
Lower Support | 1 |
Lower Support Foot Pad | 1 |
Upper Collection Bags | 2 |
Lower Collection Bags | 2 |
Flange Bolts | 6 |
Flange Bolts | 4 |
To set up the collecton bags: |
|
1.Screw the lower support foot pad onto the bottom of the lower support.
2.Attach the lower support to the Collector using two
G5954 5HP Dust Collector
3.Attach each upper bag support to an upper bag support extender using the
4.Attach each upper bag support to the Collector using two
5.Hang an upper bag from an upper bag sup- port extender.
6.Pull the bottom of the upper bag over the lip of the collector below it, and fasten it in place with a bag clamp, as shown in Figure 9.