![](/images/new-backgrounds/1283614/28361423x1.webp)
SECTION 3: SET UP
Inventory
After all the parts have been removed from the two boxes, you should have the following items:
Large Component Inventory (Figure 2) | Qty | |
A. | Casters (shown attached to base plate) | .... 4 |
B. | Base Plate | 1 |
C. | Motor/Fan Assembly | 1 |
D. | Stand Legs | 4 |
E. | Collector | 1 |
Small Component Inventory (Figure 3) | Qty | |
F. | Gasket | 1 |
G. | 1 | |
H. | Upper Bag Support Extenders | 2 |
I. | Lower Support | 1 |
J. | Upper Bag Supports | 2 |
C | D | E |
|
B | A |
Figure 2. G5954 Large Component Inventory.
I
K. | Plastic Elbows 4" 90º | 2 |
L. | Lower Bags | 2 |
M. | Upper Bags | 2 |
H
J
Other Components and Hardware | Qty | |
• Flange Bolts | ........ 32 | |
• | Washers 3⁄8" (D, E) | 16 |
• Hex Nuts | 8 | |
• Hex Bolts | 8 | |
• Flange Bolts | 6 | |
• Hex Nut | 1 | |
• Flange Bolts | 4 | |
• Lower Support Foot Pad | 1 | |
• | 1 | |
• | Bag Clamps | 4 |
NOTICE
Some hardware/fasteners on the inventory list may arrive
K
G | L |
|
F
M