Sharp FO-5900 operation manual 105, Setting 25 Beep Length, Setting 27 Department Code Digits

Optional Settings

Setting 25: BEEP LENGTH

This sets the duration of the beep that signals the end of transmission,

reception, or copying. Press 1 for 3 seconds, 2 for 1 second, or 3 for no beep.

♦Initial setting: 1

Note: Setting 26 is not used.

Setting 27: DEPARTMENT CODE DIGITS

This setting allows you to change the number of digits used for Department

Codes. Enter any number from 3 to 9 .

♦Initial setting: 4

Setting 28: DISTINCTIVE RING

Use this setting if you subscribe to a distinctive ring service from your phone company and wish to have the machine automatically answer and receive

faxes when your fax number is dialled. Press 1 to turn on distinctive ring or

2to turn it off. See page 98 for detailed information on this feature.

♦Initial setting: 2

Setting 29: VERIFICATION STAMP

Press 1 if you want the fax machine to stamp each original document page as it is scanned. After scanning, you can check to see if all pages have been stamped to verify that no double feeds occurred. Press 2 to turn the function off.

Note: To use this function, your dealer must install the Verification Stamp option.

♦Initial setting: 2

6. Optional Settings

105