Sharp FO-5900 operation manual 103, Setting 16 Cassette Selection, Setting 19 Power Save Mode

Optional Settings

Setting 16: CASSETTE SELECTION

Press 1 (AUTO SELECTION) if you want the fax machine to automatically

select the printing paper source (tray or cassette) according to the size of each page received or copied. (If a document consists of multiple pages of different sizes, each page will be printed on the paper that best matches its size.)

Press 2 (AUTO SELECTION 2) if you want the fax machine to automatically

select the printing paper source (tray or cassette) according to the size of the first page of the document received or copied. (If the document consists of multiple pages of different sizes, all pages will be printed on the same size of paper based on the size of the first page.)

Press 3 (MANUAL SELECTION) if you want to set a fixed order of priority

for the paper sources. When the 1ST PRIORITY setting appears, press 1 to have paper always drawn from the tray regardless of the size of the received or copied document, or 2 to have paper always drawn from the cassette. When the 2ND PRIORITY setting appears, press 1 to have paper

drawn from the other source in the event that the “1st priority” source runs out

of paper, or 2 (NONE) to have the incoming fax received to memory.

Note: This setting will only appear if your dealer has installed the paper cassette option and Option Setting 31 (Seperate Mode) is turned off.

♦Initial setting: 1

Note: Settings 17 and 18 are not used.

Setting 19: POWER SAVE MODE

To conserve power, you can have the laser printer heater in your fax machine turn off when not in use. When this is done, the heater will turn on automatically when you receive a document (there will be a slight delay before printing while the heater warms up) and turn off when printing is completed.

Press 1 to turn on Power Save mode, or 2 to turn it off.

♦Initial setting: 1

6. Optional Settings

103