Setting the Date and Time

Setting the Date and Time

The date and time appear in the display, in reports, and at the top of each page you transmit. Set the date and time by pressing the keys on the operation panel as shown below.

1 Press MENU

and 3 .

Display:

3:ENTRY MODE ENTER #(01-10, , )

2 Press 0 and 4 .

04:DATE&TIME SET DATE 08-06-2003

(The currently set date will appear to the right of “DATE”)

3 Enter a two-digit number for the day (“01” to “31”).

Example: The 5th 0 5

To correct a mistake, press to move the cursor back to the mistake and then enter the correct number.

4 Enter a two-digit number for the month (“01” for January, “02” for February, “12” for December, etc.).

Example: March 0 3

5 Enter the year (four digits).

Example: 2003 2 0 0 3

6 Enter a two-digit number for the hour (“00” to “23”) and a two-digit number for the minute (“00” to “59”).

Example: 9:25 0 9 2 5

26

Page 28
Image 28
Sharp FO-5900 operation manual Setting the Date and Time, Enter a two-digit number for the day 01 to Example The 5th 0