JVC LET0239-001A Appears when you have tried to delete a programme, Programme. See, Advance. See

90	ADDITIONAL INFORMATION (cont.)
MESSAGE	DESCRIPTION
DO YOU WANT TO DELETE	Appears when you have tried to delete a programme
SELECTED INDEX PICTURE?	from the HDD. Make sure you really want to delete the
	programme. (See page 36.)
GUIDE PROGRAM IS NOT SET	To use the VIDEO PLUS+® system for timer recording, set
SET GUIDE PROGRAM THEN RETRY	Guide Program number in advance. (See page 69.)
PROGRAMME COMPLETED	Timer programming is completed properly.
CHECK PROGRAMME LIST TO CONFIRM
NO PROGRAMME TO PLAYBACK	There is no recorded programme in the HDD.
PLUSCODE NO. ERROR	An invalid PLUSCODE number is entered.
CONFIRM PLUSCODE NO. THEN RETRY
PLEASE ADJUST CLOCK BEFORE TIMER	To set the timer programming, set the built-in clock in
PROGRAMMING	advance. (See page 69.)
PROGRAMME FULL	You can store 16 timer programmings. To store a new
DELETE UNWANTED TIMER PROGRAMME	programming, erase an unnecessary programming. (See
	page 45.)
PROGRAMME NOT COMPLETED	The timer programming you set is overlapping with
PROGRAMME OVERLAPPED	another timer programming.
PLEASE CONFIRM AND MODIFY
PROGRAMMING NOT COMPLETED	Appears when you stop setting timer programming.
EXIT?
REMAINING CAPACITY IS SMALL	The remaining capacity of the HDD is short for the
DELETE UNWANTED PROGRAMME FROM HDD	current recording.
TITLE MEMORY IS FULL, UNABLE TO RECORD	You have already stored 100 programmes in the HDD.
DELETE UNWANTED PROGRAMME FROM HDD	The recording cannot be started even though the capacity
	for the recording is enough.
UNABLE TO GO BACK ANYMORE	You cannot go back beyond the start point of the
	recording.
UNABLE TO GO FORWARD ANYMORE	You cannot go forward beyond the end point of the
	recording.
UNABLE TO SET TIMER PROGRAMME	There is not enough memory in the HDD for recording.
DUE TO SHORTAGE OF CAPACITY	To increase the free space, delete the unwanted
DELETE UNWANTED PROGRAMME FROM HDD	programmes. (See page 36.)