JVC LET0239-001A To assign the station names, To fine-tune the station channel, Press Enter again

Press ENTER again.

The Manual Channel Setup screen appears.

72 CHANGING THE INITIAL SETTINGS (cont.)

To change the programme position number assigned to a station

1Show the confirmation screen for Manual Channel Setup.

1Press SET UP.

2Press 3 or 2 to move to “INITIAL SET UP,” then press °.

3Press 3 or 2 to move to “TUNER SET,” then

press ENTER.

4Press ° or 5 to move to “MANUAL CH SET,” then press ENTER.

2Press 3 / 2 / ° / 5 to select a programme position number in which a station you want to move is stored, then press ENTER.

The channel number (under “CH”) and station name (under “ID”) start flashing.

3Press 3 / 2 / ° / 5 to select a new programme position number for the station you have selected, then press ENTER.

•Example: If you moved the station in position 4 to position 2, the stations originally in positions 2 and 3 are reassigned the new position numbers.

26	BBC1	26	BBC1
23	ITV	33	BBC2
30	CH4	23	ITV
33	BBC2	30	CH4
37	CH5	37	CH5
[ENTER]		[ENTER]
		[CANCEL]
[SET UP]		[SET UP]

4Repeat steps 2 and 3 as necessary.

5Press SET UP three times to finish the setting.

To fine-tune the station channel

1Show the confirmation screen for Manual Channel Setup.

1Press SET UP.

2Press 3 or 2 to move to “INITIAL SET UP,” then press °.

3Press 3 or 2 to move to “TUNER SET,” then press ENTER.

4Press ° or 5 to move to “MANUAL CH SET,” then press ENTER.

2Press 3 / 2 / ° / 5 to select a programme position number in which a station you want to fine tune is stored, then press ENTER.

The channel number (under “CH”) and station name (under “ID”) start flashing.

3Press ENTER again.

The Manual Channel Setup screen appears.

4Press 3 repeatedly until “+/–” begins flashing.

5Press ° or 5 to fine tune the picture to obtain the best picture.

6Press ENTER.

The confirmation screen appears.

7Repeat steps 2 to 6 to fine tune other stations.

8Press SET UP three times to finish the setting.

To assign the station names

To assign the preset station names (see the tables on pages 73 and 74)

1Show the confirmation screen for Manual Channel Setup.

1Press SET UP.

2Press 3 or 2 to move to “INITIAL SET UP,” then press °.

3Press 3 or 2 to move to “TUNER SET,” then press ENTER.

4Press ° or 5 to move to “MANUAL CH SET,” then press ENTER.

2Press °or 5to select a programme position number in which a station you want to assign a name to is stored, then press ENTER.

The channel number (under “CH”) and station name (under “ID”) start flashing.

3

4Press 3 repeatedly until the station name (under “ID”) starts flashing.

5Press ° or 5 to select a new station name.

•Each time you press the button, preset names change.

[ENTER] [SET UP]