49

Resuming playback

The unit can memorize the position on a disc where you have stopped playback, and resume playback from that position later.

You can select either “ON” or “DISC RESUME” for resume function.

You can select your desired option using the menu (see page 79).

When “RESUME” is set to “ON” (initial setting)

When you press 7(CLEAR) (“RESUME STOP” appears on the TV) or try to operate the HDD deck, the unit stops playback and memorizes the interrupted position.

The memory of the interrupted position is cleared when you turn off the unit or when you eject the disc.

Next time you press 3 (SELECT), playback starts from the interrupted position of the disc (“RESUME PLAY” appears on the TV).

To play back from the beginning, press 7 (CLEAR), then press 3 (SELECT).

When “RESUME” is set to “DISC RESUME”

When you press 7(CLEAR) (“RESUME STOP” appears on the TV) or try to operate the HDD deck, the unit stops playback and memorizes the interrupted position.

The memory of the interrupted position is not cleared even if you eject the disc or turn off the unit.

When you insert a disc for which the unit has stored an interrupted position (“RESUME STOP” appears on the TV). Then when you press 3 (SELECT), playback starts from the interrupted position (“RESUME PLAY” appears on the TV).

To play back from the beginning, press 7(CLEAR) after inserting a disc, then press 3 (SELECT) to start playback.

NOTE

The unit memorizes interrupted positions for the 30 discs played recently. Storing an interrupted position for a 31st disc will erase the interrupted position stored first.

To clear the memory

Press 7 (CLEAR) while the disc is not playing.

To cancel the resume function

Select “OFF” for “RESUME” (see page 79).

NOTES

•If you change the “RESUME” setting from “DISC RESUME” to “OFF” or “ON,” the unit cannot recall the interrupted position stored for the discs; however, the stored interrupted positions are never erased due to this setting change.

•If you stop playback of a disc with an interrupted position stored in memory, this new interrupted position is stored for the disc (the previous interrupted position is overwritten in memory).

•For a double-sided DVD Video, the unit stores an interrupted position separately for each side. To start playing such a disc, make sure of inserting it with the desired side down.

•When the unit memorizes an interrupted point for a disc, it also memorizes Audio, Subtitle and Angle settings. (See pages 56 and 60.)

•The unit may not resume playback exactly from the interrupted point of a disc. In the case of an SVCD/VCD disc with PBC, the unit may start playing it back from a point slightly different point (either backward or forward).

Various speed playback

Advancing or reversing playback rapidly while monitoring

During playback, press Á or 1 repeatedly on the remote control.

Each time you press Á or 1, the playback speed changes as follows:

:

x1.5

x5

x20

x60

:

x1.5

x5

x20

x60

To return to the normal speed, press 3 (SELECT).

NOTES

•You can use x1.5 quick playback with sound only while playing a DVD Video or VCD. You can listen to the sounds and also see the subtitle (for DVD) on the TV. (Sound quality, level, or tone may be changed for some discs.)

•During x1.5 quick playback with sound on a DVD Video or VCD, the digital sound is output in stereo linear PCM format through the DVD DIGITAL OUT connectors.

•Rapid playback at 1.5 times normal speed is also possible on the other types of disc; however, the sound cannot be heard (for CDs, the sound will be heard intermittently).

•If you press and hold ¢or 4either on the unit or on the remote control, playback is advanced or reversed at 5 times normal speed.

Page 49
Image 49
JVC XV-DDV1SL manual Resuming playback, Various speed playback, Advancing or reversing playback rapidly while monitoring