78

 

 

 

CHANGING THE INITIAL SETTING (cont.)

AUDIO

 

 

 

 

 

 

 

 

Set this correctly according to the external component connected to the DIGITAL OUT

 

 

connectors on the rear.

DIGITAL AUDIO

 

• See “Digital output signal chart” on page 92 for details about the relation between the

 

setting and output signals.

OUTPUT

 

 

 

 

 

Setting options

 

PCM ONLY:

Select when connecting to the linear PCM digital input connector

 

 

 

of other audio equipment such as an MD recorder.

PCM ONLY

 

 

 

 

DOLBY DIGITAL/PCM: Select when connecting the digital input connector of a Dolby

DOLBY DIGITAL/

 

 

 

 

Digital decoder or an amplifier with a built-in Dolby Digital

PCM

 

 

 

 

 

 

decoder.

• STREAM/PCM

 

 

 

 

STREAM/PCM:

Select when connecting the digital input connector of an

 

 

 

 

 

 

amplifier with a built-in DTS, MPEG Multichannel or Dolby

 

 

 

 

Digital decoder, or the stand-alone unit of such a decoder.

 

 

 

 

 

To correctly play the audio in a DVD Video disc recorded with surround multichannel audio,

 

 

set this properly according to your audio system configuration.

 

 

DOLBY SURROUND: Select when listening to multichannel surround audio through a

ANALOG DOWN

 

 

 

surround decoder connected to the DVD/HDD AUDIO OUT and

 

 

 

L-1 IN/OUT connectors on the rear.

MIX

 

 

 

 

STEREO:

Select when listening to conventional two-channel stereo audio

Setting options

 

 

 

 

through an amplifier or receiver connected to the DVD/HDD

DOLBY

 

 

 

AUDIO OUT and L-1 IN/OUT connectors on the rear.

SURROUND

 

 

 

You can also connect a MiniDisc recorder, cassette deck, etc. to

• STEREO

 

 

 

record through the DVD/HDD AUDIO OUT (and L-1 IN/OUT)

 

 

 

 

connectors on the rear.

 

 

 

 

 

 

 

NOTE

 

 

 

 

This function does not take effect when 3D PHONIC is activated.

 

 

 

D. RANGE

 

This setting provides optimal audio quality through the DVD/HDD AUDIO OUT and L-1 IN/

 

OUT connectors on the rear, for listening to DVD Video discs recorded in Dolby Digital

CONTROL

 

 

format, at low or middle volume.

Setting options

 

 

WIDE RANGE:Select to enjoy powerful playback sound with the widest dynamic range.

WIDE RANGE

 

 

NORMAL:

Normally, select this.

• NORMAL

 

 

TV MODE:

Select if DVD Video disc sound level is lower than TV programme sound

TV MODE

 

 

 

 

level. Thus you can hear sound at a lower volume clearly.

 

 

 

 

 

 

 

OUTPUT LEVEL

 

This setting allows you to attenuate the level of the signal output through the DVD/HDD

Setting options

 

AUDIO OUT and L-1 IN/OUT connectors on the rear.

 

 

 

 

• STANDARD

 

STANDARD:

Normally, select this.

LOW

 

LOW:

Select if the reproduced sounds are distorted.

 

 

 

 

 

Page 78
Image 78
JVC LET0239-001A, XV-DDV1SL manual PCM only, Normal, Low