JVC LET0239-001A, XV-DDV1SL manual Adjusting the picture, Zooming, To clear the VFP mode window

58 ADVANCED DVD OPERATIONS (cont.)

Adjusting the picture

Video Fine Processor (VFP) allows you to adjust the picture according to the type of software, picture tone or personal preferences.

Set the video type most suitable to the current software or the room conditions.

1During playback, press VFP.

The VFP mode selection window appears on the TV screen.

2Press 3 or 2 to select the desired preset.

•Each time you press the button, the VFP mode changes as follows.

NORMALCINEMAUSER 1USER 2

Selected preset

USER 1

GAMMA	+ 4
BRIGHTNESS	+ 4
CONTRAST	+13
SATURATION	+13
TINT	+13
SHARPNESS	+ 3
Y DELAY	+ 2

Parameter

•NORMAL: For watching TV in a general room.

•CINEMA: For watching a movie software in a room with suppressed light.

•USER 1/USER 2: You can adjust parameters that affect the picture character and store the settings as a user preset. See the next step.

3To define a user setting (USER 1/USER 2), press ° or 5to select a parameter to edit from the following.

• GAMMA

Adjust this if the neutral colour is bright or dark. The brightness of dark and bright portion remains unchanged.

Available range: –4 (darkest) to +4 (brightest).

• BRIGHTNESS

Adjust this if the picture is bright or dark on the whole. Available range: –16 (darkest) to +16 (brightest).

• CONTRAST

Adjust this if the far and near position is unnatural. Available range: –16 to +16.

• SATURATION

Adjust this if the picture is whitish or blackish. Available range: –16 (black) to +16 (white).

• TINT

Adjust this if the appearance of flesh tone is unnatural. Available range: –16 to +16.

• SHARPNESS

Adjust this if the picture is indistinct.

Available range: 0 to +3.

• Y DELAY

Adjust this if the picture looks separately/overlapped. Available range: –2 to +2.

4Press ENTER.

A window for setting parameters appears.

SATURATION + 4

Selected parameter

5Press° or 5to adjust the level of the parameter. The higher value enhances the effect.

6Press ENTER.

Repeat steps 3 to 6 if you want to set other parameters.

To clear the VFP mode window

Press VFP.

NOTES

•The VFP mode window disappears if no operation is made for about 10 seconds.

•While zoomed, VFP cannot be used.

Zooming in

1During playback or while paused, press ZOOM. At the top left of the screen, the information for the current magnification appears for about 5 seconds.

•Each time you press the button, the magnification becomes higher (1.8, 4, 8, 16, 32 and 64 times).

ZOOM x 4

2Press 3 / 2 / ° / 5 to move the zoomed position.

To release the zoom

Press ENTER.

NOTES

•When a wide-screen picture of a DVD Video is viewed on a normal TV (4:3 Letter Box), black bars may appear at the top and bottom of the screen. In this case, if you select “ZOOM ⋅ 1.8,” the black bars become almost invisible. When a 1:2.35 or 1:1.85 DVD Video source is played back, however, the black bars are still visible on the TV.

•While zoomed, the picture may look coarse.