On-screen messages, Picture, Audio, MP3 disc

Picture:

The picture is not displayed properly.

]Set the DVD VIDEO SIGNAL SELECTOR to the appropriate position (see page 12).

Picture is noisy.

]A VCR is connected in between the unit and the TV. Connect the unit so that the picture signal ﬂows directly to the TV.

]With some discs, the picture may be blurred when “PICTURE SOURCE” is set to “FILM” or “AUTO.” Set “PICTURE SOURCE” to “VIDEO (NORMAL)” or “VIDEO (ACTIVE)” (see page 77).

The playback picture through the L-2 IN connector is not displayed properly.

]You have connected an RGB component.

Connect a composite video or S-Video component or set the signal output mode of the connected component to composite or S-Video signal (see page 85).

Audio

DVD Video disc playback sound level is lower than TV broadcast sound level.

]Set the “D.RANGE CONTROL” to “TV MODE” (see page 78).

Sound reproduced are distorted.

]Set the “OUTPUT LEVEL” to “LOW” (see page 78).

MP3 disc:

No sound comes out.

]MP3 disc is recorded with the “packet writing (UDF format).” It cannot be played.

Files (tracks) are not played in the recorded order.

]This unit plays the ﬁles in the alphabetic order. So, the playback order may be different from what you have expected.

JPEG disc:

No picture is played back.

]Only the baselined-JPEG ﬁle can be played back.

The screen turns black.

]Only the baselined-JPEG ﬁle can be played back.