JVC XV-DDV1SL Setting the clock time, Just Clock, Press or 5 to set the current time, then press

The Clock Set screen appears.

[ENTER] [SET UP]

Press °or 5to move to “CLOCK SET,” then press

ENTER.

Press 3 or 2 to move to “INITIAL SET,” then press ENTER.

1 Press SET UP.

2 Press 3 or 2 to move to “INITIAL SET UP,” then press °.

Just Clock does not work in the following cases: •When the unit is turned on.

•When the unit stands by for the timer recording or Automatic Satellite Recording.

•When “L-2 SELECT” is set to “SAT.”

•When the built-in clock moves more than 3 minutes slower or faster.

•When the signal reception is not good enough.

IMPORTANT: If you turn off Just Clock, the accuracy of the built-in clock may be reduced, which could adversely effect timer recording. It is recommended to turn “ON” Just Clock. However, where the clock setting data from a PDC signal is not accurate, turn “OFF” Just Clock.

4

3

Guide programme number

“Guide programme (GUIDE PROG) number” refers to the assigned TV station numbers in your area for the VIDEO PLUS+® system. The Guide Program numbers can be found in most TV listings.

10 Press SET UP twice to finish the setting.

Setting the Guide Program number for VIDEO PLUS+® System

Normally, Auto Setup (see page 13), TV-Linked Setup (see page 14) or Auto Channel Set (see page 70) sets the Guide Program numbers automatically.

Set the Guide Program numbers manually in the following cases.

• When the VIDEO PLUS+® system cannot select the correct programme position number for the station you want to record.

• When you add a new station manually.

• When you want to record a satellite programme using the VIDEO PLUS+® system (Set the Guide Program numbers for all satellite broadcast stations which can be received on your satellite receiver.)

Press ° or 5 to select the station from which you receive the clock setting signal.

• Select the station transmitting the clock setting signal—BBC1, BBC2,Channel 4, etc.

9

• If you hold ° or 5, the date changes in 15-day intervals.

7 Press ° or 5 to set the year, then press ENTER.

8 Press ° or 5 to set Just Clock, then press ENTER.

• Each time you press ° or 5, Just Clock turns “ON” and “OFF” alternately.

Press ° or 5 to set the date, then press ENTER.

6

69

Setting the clock time

If you have performed Auto Setup (see page 13) or TV- Linked Setup (see page 14), the clock is set automatically. Set the clock manually in the following cases.

•When the clock time has not been set correctly by Auto Setup, TV-Linked Setup, or Auto Channel Set.

•When the backup memory is expired.

•When you want to change Just Clock* setting yourself.

* Just Clock

Just Clock provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. It also automatically adjust the summer time setting.

•Just Clock adjusts the built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

NOTES

[ENTER] [SET UP]

5Press ° or 5 to set the current time, then press

ENTER.

•If you hold ° or 5, the time changes in 30-minute intervals.

Example: When inputting Guide Program number 4 for CH4.

1Press SET UP.

2Press 3 or 2 to move to “INITIAL SET UP,” then press °.

3Press 3 or 2 to move to “INITIAL SET,” then press ENTER.

4Press °or 5to move to “GUIDE PROG SET,” then

press ENTER.

5 Press ° or 5 to enter the
Guide Program number for
the desired station as
shown in the TV listings,		[ENTER]
	[SET UP]
then press ENTER.