36

EDITING HDD NAVIGATION (cont.)

To change (or newly assign) the title

1Show the main modification screen.

1Press EDIT.

2Press ENTER after making sure that is pointing at “MODIFY” under “REC LIST.”

3Press 3 / 2 / ° / 5 to move to a thumbnail you want, then press ENTER.

2Enter the title entry screen.

Press 3 / 2 / ° / 5 to move to “TITLE,” then press

ENTER.

• The EDIT>TITLE screen appears.

3Enter a new title.

To enter the characters, press 3 / 2 / ° / 5 to move to a desired character, then press ENTER. (Repeat this until you enter the entire title (the maximum of 26 characters)

To enter a space, press 3 / 2 / ° / 5 to move to an empty square in the character table, or to “>,” then press ENTER.

To delete and correct a misentry:

1 Press 3 / 2 / ° / 5 to move to “<”or “>,” then press ENTER repeatedly until the incorrect character is selected.

2Press 3 / 2 / ° / 5 to move to “DELETE,” then press ENTER.

The entered characters following the deleted one moves leftward.

3Press 3 / 2 / ° / 5 to move to a correct character, then press ENTER.

4Save the title.

Press 3 / 2 / ° / 5 to move to “SAVE,” then press

ENTER.

If you want to cancel the procedure, move to “CANCEL,” then press ENTER.

5Finish the procedure.

To delete an unnecessary programme

1Show the EDIT screen.

Press EDIT.

2Enter the REC LIST/DELETE screen.

Press 3 or 2 to move to “DELETE” under “REC LIST,” then press ENTER.

The REC LIST/DELETE screen appears.

3Select an unnecessary programme.

Press 3 / 2/ ° / 5 to move to a thumbnail you want to delete, then press ENTER.

The confirmation screen appears.

4Perform the deletion.

Press 2to move to “DELETE,” then press ENTER.

If you want to cancel the deletion, press 3 move to “CANCEL,” then press

ENTER.

5Delete more unnecessary programmes.

Repeat steps 3 and 4.

6Finish the procedure.

Press EDIT.

Press EDIT.

Page 36
Image 36
JVC LET0239-001A manual Enter the title entry screen, Enter a new title, Save the title, Enter the REC LIST/DELETE screen