JVC LET0239-001A, XV-DDV1SL manual Signals is used for connection, Connector, This unit

68		CHANGING THE INITIAL SETTINGS (cont.)
INPUT/OUTPUT
	Set this correctly according to the external component connected to the L-1 IN/OUT
	connector. This setting affects only the output through the HDD and the build-in TV tuner.
L-1 OUTPUT	• VIDEO: Select when the external component accepts composite video signals.
Setting options	• S-VIDEO: Select when the external component accepts S-video (Y/C) signals. You can
	obtain the better picture quality. (Be sure that a 21-pin SCART cable compatible with the
• VIDEO
	Y/C signals is used for connection.)
•S-VIDEO
	NOTE
	• If “L-1 INPUT” is set to “S-VIDEO,” you cannot select “S-VIDEO” for “L-1 OUTPUT.”
	Set this correctly according to the external component connected to the L-1 IN/OUT
	connector.
L-1 INPUT	• VIDEO: Select when the external component emits composite video signals.
Setting options	• S-VIDEO: Select when the external component emits S-video (Y/C) signals. You can obtain
	the better picture quality. (Be sure that a 21-pin SCART cable compatible with the Y/C
• VIDEO
	signals is used for connection.)
•S-VIDEO
	NOTE
	If “L-1 OUTPUT” is set to “S-VIDEO,” you cannot select “S-VIDEO” for “L-1 INPUT.”
	Set this correctly according to the usage of the external component connected to the L-2 IN
	connector.
	• A/V: Select when you use the HDD deck as the recording device or use the satellite
L-2 SELECT	receiver connected to the L-2 IN connector
	• SAT: Select when you want to view a satellite programme on the TV without turning on
Setting options
	this unit.
• A/V
•SAT	NOTE
	•When power failure occurs or when this unit is unplugged, this function is automatically reset to
	“A/V.”
	•When a satellite receiver is not connected to the L-2 IN connector, set this function to “A/V.”
	•“L-2 SELECT” is set to “SAT,” “SAT” appears on the TV and in the display window (instead of “L-2”).
L-2 INPUT	Set this correctly according to the external component connected to the L-2 IN connector.
	• VIDEO: Select when the external component emits composite video signals.
Setting options
	• S-VIDEO: Select when the external component emits S-video (Y/C) signals. You can obtain
• VIDEO
	the better picture quality. (Be sure that a 21-pin SCART cable compatible with the Y/C
•S-VIDEO
	signals is used for connection.)
F-1 INPUT	Set this correctly according to the type of connection made for the F-1 connector.
Setting options	• VIDEO: Select when connecting the external component to the VIDEO jack.
• VIDEO	• S-VIDEO: Select when connecting the external component to the S-VIDEO jack.
•S-VIDEO
FAMILY

Family members

Setting options

•ON

•OFF

Set this to fit to your family. When shipped from the factory, all listed family members are set to “ON” so that they can be displayed on the CATEGORY screen for HDD Navigation.

•You can erase unnecessary family members from the CATEGORY screen by setting them to “OFF.”