Operations
Setting the source to be played
|
| E F | I J | K | L | M N | O P |
D |
|
|
|
|
| UTILITY | BACK TAG TRACK |
|
| BROWSE | TAG LIST | INFO | MENU | /REMOVE | |
|
| STANDBY | |||||
|
|
| PC |
|
|
| |
C | USB |
|
|
|
|
| DISC EJECT |
B |
| USB |
|
|
|
| |
STOP |
|
|
|
| R | ||
|
|
|
|
|
|
| |
|
|
| DISC |
|
|
|
|
| 1 /16 | 1 |
|
|
|
|
|
|
| TIME | AUTO |
|
|
|
|
|
| MODE | CUE |
|
|
|
|
| 1 / 8 | 2 |
|
|
|
| VINYL |
I J C
Loading discs
!Set the disc with the printed side facing up.
!Insert the disc horizontally into the disc insertion slot in the main unit’s front panel.
!Do not load more than 1 disc.
!Do not force discs into the set’s disc insertion slot when the set’s power is off. Doing so could damage the disc or the set.
!When the disc is being drawn in or ejected, do not apply any force to the disc in the direction opposite its movement. Doing so could damage the disc or the set.
1 Press [u] C.
Turn on the power of this unit.
2 Load the disc in the disc insertion slot I.
Playback starts.
!When auto cue is turned on, playback starts when
[PLAY/PAUSEf] is pressed. For details on the auto cue function, see Setting auto cue on page 21.
Ejecting discs
Press [hDISC EJECT] R.
The disc is ejected from the disc insertion slot.
!If [DISC EJECT h] is pressed accidentally, press [PLAY/PAUSEf] immediately to return to the status directly before [DISC EJECT h] was pressed. (No sound is output during this time.)
About ejecting discs by force
!If the disc is not ejected when [DISC EJECT h] is pressed, the disc can be ejected forcibly by inserting the disc force eject pin into the disc force eject pin insertion hole on the main unit’s front panel.
!When forcibly ejecting a disc, be sure to do so following the proce- dure below.
1Press [u] C to turn this unit’s power off, then wait at least 1 minute.
Never forcibly eject a disc directly after turning off the set’s power. Doing so is dangerous for the reasons described below.
!The disc will still be spinning when ejected and could hit your fingers, etc., causing injury.
!Also, the disc clamp will rotate in an unstable way, and the disc could get scratched.
2Use the included disc force eject pin. (Do not use anything else.)
The included disc force eject pin is mounted on the
Loading USB devices
Connect the USB device to the USB device insertion slot D.
The USB indicator lights.
Removing USB devices from the set
!Be sure to follow the procedure below when removing USB devices from the set. Removing a USB device without following this procedure could erase the set’s management data and make it impossible to read the USB device.
!When turning the set’s power off, be sure to remove the USB device first.
1 Press [USB STOP] B for at least 2 seconds.
The USB indicator turns off.
2 Disconnect the USB device.
Using the [BROWSE] button
When [BROWSE] is pressed, the contents of the medium loaded in this unit are displayed on the information display section.
Browsing libraries and folders
This displays the loaded tracks, sorted in category or tree structure. The display on the information display section differs according to whether or not library information is recorded on the USB device.
—With library information d Library browsing: The music files are displayed by the categories set in rekordbox (album, artist, etc.). The category types can be changed in the Preferences (environ- mental settings) in rekordbox.
—Without library information d Folder browsing: The folders/tracks
on the medium are displayed with a tree structure.
Contents recorded on discs cannot be viewed in the library browse mode.
12
Title 01
Title 02
Title 03
Operations
En 17