English

Setting Player to Play Discs via Radio [Page 21~22]

Modulating frequencies selector

Pre-emphasis selector

This system can change the frequency at

Normally, set the pre-emphasis selector

which the FM car radio receives the CD

to “PRE-EMP 1”. (The initial setting is

audio signals within the range of 87.9 to

“PRE-EMP 1”.)

90.1 MHz in 0.2-MHz increments. (The ini-

Play a disc. If you feel the treble is insuffi-

tial setting is 89.1 MHz.) If there is a

cient, switch the selector to “PRE-EMP 2”

strong broadcast station signal near the

to boost the treble slightly.

current frequency, radio interference may

• When the selector is set to “PRE-EMP

occur. If it occurs, change the frequency.

2”, the sound may distort with some car

Source level adjuster

radios. In this case, switch it back to

“PRE-EMP 1”.

When you play discs, If the volume is low

 

compared with that for FM increase the

 

volume level. If the volume is high and

 

there is distortion, decrease the volume

 

level. (The initial setting is “LEVEL-4”.)

 

 

1. Hold down button for more than 2

 

seconds. The modulator setting

or

mode will be entered, and the fre-

 

quency will be displayed.

 

MEMO

 

If you do nothing within the next 8 sec-

 

onds, the modulator setting mode

 

returns to the normal mode without

 

changing the most recent settings.

21

Page 21
Image 21
Pioneer CDX-FM687, CDX-FM1287 Setting Player to Play Discs via Radio Page 21~22, Hold down button for more than