Pioneer DEH-1050E operation manual Audio Adjustments

	Section
Operating this unit	02

2 Press a to turn scan play on.

SCAN appears in the display. The first 10 sec- onds of each track is played.

3When you find the desired track press

b to turn scan play off.

# If the display has automatically returned to the playback display, select SCAN again by press-

ing FUNCTION.

# After scanning of a CD is finished, normal playback of the tracks will begin again.

Pausing disc playback

Pause lets you temporarily stop playback of the disc.

1Press FUNCTION to select PAUSE.

2Press a or b to turn pause on or off.

# You can also turn pause on or off by pressing

PAUSE.

# To return to the normal display, press BAND.

Audio Adjustments

Using balance adjustment

Fader/balance setting creates an ideal listen- ing environment in all occupied seats.

1Press AUDIO to select FAD.

2Press a or b to adjust front/rear speak- er balance.

FAD F15 to FAD R15 is displayed.

# FAD 0 is the proper setting when only two speakers are used.

3Press c or d to adjust left/right speaker balance.

BAL L15 to BAL R15 is displayed.

# To return to the normal display, press BAND.

Using the equalizer

There are six stored equalizer settings such as

DYNAMIC, VOCAL, NATURAL, CUSTOM, FLAT and POWERFUL that can easily be re- called at any time.

!CUSTOM is an adjusted equalizer curve that you create.

!When FLAT is selected no supplement or correction is made to the sound.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers:

DYNAMIC—VOCAL—NATURAL—CUSTOM

—FLAT—POWERFUL

Adjusting equalizer curves

You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM.

Adjusting bass/mid/treble

You can adjust the bass/mid/treble level.

1Press AUDIO to select BASS/MID/

TREBLE.

2Press a or b to adjust the level.

+6 to –6 is displayed as the level is increased or decreased.

#To return to the normal display, press BAND.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Press AUDIO to select LOUD.

2Press a or b to turn loudness on or off.

# You can also turn loudness on or off by press- ing and holding EQ.

3Press c or d to select a desired level.

LOW (low)—HI (high)

# To return to the normal display, press BAND.

English

En 7