Black plate (8,1)
<CRD4039-A/N>8
Audio Adjustments

Introduction of audio adjustments

%PressAUDIO to display the audio func-
tionnames.
PressAUDIO repeatedly to switch between
thefollowing audio functions:
FAD(balance adjustment)BASS (bass ad-
justment)MID(mid-range adjustment)
TREBLE(treble adjustment)LOUD (loud-
ness)SLA(source level adjustment)
#Whenselecting the FM tuner as the source,
youcannot switch to SLA.
#Toreturn to the display of each source, press
BAND.

Using balance adjustment

Youcan select a fader/balance setting that
providesan ideal listening environment in all
occupiedseats.
1 PressAUDIO to select FAD.
#Ifthe balance setting has been previously ad-
justed,BAL will be displayed.
2 Press+ or to adjust front/rear speaker
balance.
FADF15 FAD R15 is displayed as the front/
rearspeaker balance moves from front to rear.
3 Presscor dto adjust left/right speaker
balance.
BALL 9 BAL R 9 is displayed as the left/right
speakerbalance moves from left to right.

Using the equalizer

Thereare six stored equalizer settings such as
DYNAMIC,VOCAL,NATURAL,CUSTOM,
FLATand POWERFUL that can easily be re-
calledat any time.
!CUSTOMis an adjusted equalizer curve
thatyou create.
!WhenFLAT is selected no supplement or
correctionis made to the sound. This is
usefulto check the effect of the equalizer
curvesby switching alternatively between
FLATand a set equalizer curve.
%PressEQ to select the equalizer.
PressEQ repeatedly to switch between the fol-
lowingequalizers:
DYNAMICVOCALNATURALCUSTOM
FLATPOWERFUL

Adjusting equalizer curves

Youcan adjust the currently selected equalizer
curvesetting as desired. Adjusted equalizer
curvesettings are memorized inCUSTOM.

Adjustingbass/mid/treble

Youcan adjust the bass/mid/treble level.
1 PressAUDIO to select BASS/MID/
TREBLE.
2 Press+ or to adjust the level.
+66is displayed as the level is increased
ordecreased.

Adjusting loudness

Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 PressAUDIO to select LOUD.
2 Press+ to turn loudness on.
LOUDindicator is displayed.
#Toturn loudness off, press .
#Youcan also turn loudness on or off by press-
ingLOUDNESS.
3 Presscor dto select a desired level.
LOW(low)HI (high)

Adjusting source levels

SLA(source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM tuner volume
level,which remains unchanged.
!TheAM tuner volume level can also be ad-
justedwith source level adjustments.
1 Comparethe FM tuner volume level
withthe level of the source you wish to ad-
just.
Operating this unit
En
8
Section
03