Pioneer DEH-200MP Other Functions, Adjusting equalizer curves, Adjusting initial settings

Section

02Operating this unit

!When FLAT is selected no supplement or correction is made to the sound.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers:

DYNAMIC—VOCAL—NATURAL—CUSTOM

—FLAT—POWERFUL

Adjusting equalizer curves

You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM.

Adjusting bass/mid/treble

You can adjust the bass/mid/treble level.

!Settings are based on the FM volume level, which remains unchanged.

!The MW/LW volume level can also be ad- justed with source level adjustments.

1Compare the FM volume level with the level of the source you wish to adjust.

2Press AUDIO to select SLA.

3Press a or b to adjust the source vo- lume.

SLA +4 to SLA –4 is displayed as the source

volume is increased or decreased.

# To return to the normal display, press BAND.

1Press AUDIO to select BASS/MID/

TREBLE.

2Press a or b to adjust the level.

+6 to –6 is displayed as the level is increased or decreased.

#To return to the normal display, press BAND.

Other Functions

Adjusting initial settings

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

1Press SOURCE and hold until the unit turns off.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Press AUDIO to select LOUD.

2Press a or b to turn loudness on or off.

# You can also turn loudness on or off by press- ing and holding EQ.

3Press c or d to select a desired level.

LOW (low)—HI (high)

# To return to the normal display, press BAND.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.

2Press SOURCE and hold until function name appears in the display.

3Press FUNCTION to select one of the in- itial settings.

Press FUNCTION repeatedly to switch be- tween the following settings:

FM (FM tuning step)—A-PI (auto PI Seek)— AUX (auxiliary input)—SAVE (power save)— TITLE (multi language)

Use the following instructions to operate each

particular setting.

# To cancel initial settings, press BAND.

# You can also cancel initial settings by holding down SOURCE until the unit turns off.

12 En