Pioneer DEH-200MP Built-in Player, Receiving traffic announcements, Playing a disc, Eject

Operating this unit

Receiving traffic announcements	Built-in Player
TA (traffic announcement standby) lets you re-	Playing a disc
ceive traffic announcements automatically, no
	1 Insert a CD (CD-ROM) into the disc load-
matter what source you are listening to. TA
can be activated for both a TP station (a sta-	ing slot.
tion that broadcasts traffic information) or an	Playback will automatically start.
enhanced other network’s TP station (a station	# Be sure to turn up the label side of a disc.
carrying information which cross-references	# After a CD (CD-ROM) has been inserted, press
TP stations).	SOURCE to select the built-in CD player.
1 Tune in a TP or enhanced other net-	# You can eject a CD (CD-ROM) by pressing
	EJECT.
work’s TP station.	2 Press a or b to select a folder when
TP indicator will light.
	playing a compressed audio.

Section

02

English

2Press TA to turn traffic announcement

standby on.

# To turn traffic announcements standby off, press TA again.

3Use VOLUME to adjust the TA volume when a traffic announcement begins.

The newly set volume is stored in memory and recalled for subsequent traffic announce- ments.

4Press TA while a traffic announcement is being received to cancel the announce- ment.

The tuner returns to the original source but re- mains in the standby mode until TA is pressed again.

Notes

!You can also turn the TA function on or off in the menu that appears with the pressing of

FUNCTION.

!The system switches back to the original source following traffic announcement recep- tion.

!Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM when TA is on.

#You cannot select a folder that does not have a compressed audio file recorded in it.

#To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

3To perform fast forward or reverse,

press and hold c or d.

# If you select ROUGH, pressing and holding c or d enables you to search every 10 tracks in the current disc (folder). (Refer to Searching every 10 tracks in the current disc or folder on page 11.)

4To skip back or forward to another track, press c or d.

Notes

!Read the precautions with discs and player on page 18.

!If an error message such as ERROR-11 is dis- played, refer to Error messages on page 18.

!There is sometimes a delay between starting up disc playback and the sound being issued. When being read, FRMTREAD is displayed.

!When playing CD-EXTRA or MIXED-MODE CDs, compressed audio and CD-DA can be switched by pressing BAND.

!If you have switched between compressed audio and CD-DA, playback starts at the first track on the disc.

!The built-in CD player can play back com- pressed audio recorded on CD-ROM. (Refer to page 19 for files that can be played back.)

En 9