| Section |
Operating this unit | 02 |
|
|
#When FOLDER (folder repeat) is selected, it is not possible to play back a subfolder of that folder.
#You can also perform this operation in the menu that appears by using
Playing tracks in random order
Tracks in a selected repeat range are played in random order.
%Press 5/ 
to turn random play on.
Tracks play in a random order.
# To turn random play off, press 5/ 
again.
# You can also perform this operation in the menu that appears by using
Scanning folders and tracks
Scan play searches the song within the se- lected repeat range.
Using compression and BMX
Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit.
1Use
2Press
3Turn
OFF—COMP 1—COMP 2—OFF—BMX 1— BMX 2
4Press
the selection.
# Even if the menu has been cancelled before determination, operation is settled.
English
1Use
2Press
on.
The first 10 seconds of each track is played.
3When you find the desired track press
# If the display has automatically returned to the playback display, select SCAN again by using
MULTI-CONTROL.
# After scanning of a disc (folder) is finished, normal playback of the tracks begins.
Pausing playback
1Use
2Press
on.
Playback of the current track pauses.
# To turn pause off, press
Playing songs on iPod
For details about the supported iPod, refer to iPod compatibility on page 4.
Basic Operations
%Select a track (chapter) Press c or d.
%Fast forward or reverse Press and hold c or d.
Notes
!Read the precautions for iPod on page 25.
!While iPod is connected to this unit, PIONEER (or 
(check mark)) is displayed on the iPod.
!If an error message is displayed, refer to Error messages on page 23.
!When the ignition switch is set to ACC or ON, the iPod’s battery is charged while the iPod is connected to this unit.
!While the iPod is connected to this unit, the iPod cannot be turned on or off.
!Before connecting the dock connector of this unit to the iPod, disconnect the headphones from the iPod.
En 
13
