2 Tightentwo screws on each side.
Screw
Mountingbracket Dashboardor console
!Useeither truss (5 mm × 8 mm) or flush
surface(5 mm × 9 mm) screws, depending
onthe bracket screw holes.

Removing the unit

1 Extendtop and bottom of the trim ring
outwardsto remove the trim ring. (When
reattachingthe trim ring, point the side
withthe groove down.)
Trimring
!Releasingthe front panel allows easier ac-
cessto the trim ring.
2 Insertthe supplied extraction keys into
bothsides of the unit until they click into
place.
3 Pullthe unit out of the dashboard.
Fastening the front panel
Ifyou do not plan to detach thefront panel,
thefront panel can be fastened with the sup-
pliedscrew.
Screw
Installation
En 17
English
Section
03